Product Catalog

  • Manufacturer: Werner Ladders
  • Model Number: 2324

Werner Aluminum Stage Ladder 12" x 24'

  • Manufacturer: Werner Ladders
  • Model Number: 2416

Werner Aluminum Stage Ladder

  • Manufacturer: Niftylift
  • Model Number: TM34

34 ft. Platform Height 

16ft, 6 in. Working Outreach

  • Manufacturer: Airman
  • Model Number: PDS 185s

PDS185S Trailer 5.0 7.0 2,960 x 1,650 x 1,430

  • Manufacturer: Bri-Mar
  • Model Number: DT508LP

GVW: 5,000 lbs
Bed Size: 60" W x 8' L
Deck Height: 25"
Empty Weight: 1,185 lbs
Capacity: 1.9 cubic yds

  • Manufacturer: Gehl
  • Model Number: Z17 GEN 2

Z17 GEN: 2 Compact Excavator
Maximum Digging Depth (mm): 7' 2.6" (2200)
Net Power (kW): 14.5 hp (10.8)
Ground Pressure Canopy (kPa): 4.1 psi (28.6)

  • Manufacturer: Host Carpet Cleaning
  • Model Number: Reliant

Host dry carpet cleaner  

  • Model Number: Model M

Granite Industries Power Snappy Motorized Work Platform

Model M

Walkboard height adjusts from:
24” – 60”

Overall dimensions
31” x 60”

Deck Capacity 500 lbs.

  • Manufacturer: Woods Equipment
  • Model Number: N4000


  • Vacuum Pad: Flat, 8" [20 cm] diameter (model G0695)
  • Load Capacity: 125 lbs [57 kg] per vacuum cup

  • Manufacturer: Ditch Witch
  • Model Number: XT850

The Ditch Witch XT850 excavator-tool carrier features a unique, dual-pivot excavator system with a 260° total excavator sweep, for wider offset digging capability than most compact utility equipment. The 24.5-hp (18.3 kW) XT850 has independently controlled rubber tracks for zero-radius turning capability when you're in a tight spot. It's made for tight budgets, too, as it comes complete with a specially designed trailer and attachments.

  • Model Number: 7612

Exclusive Power Deck® system
Deck raises and lowers in 15 seconds
Single-lever hydraulic control
Low clearance loading with full-width, low-angle ramp
Quadra Spring suspension for smoother transport
Variety of options / accessories for extra versatility
Lockable compartments protect components and tools

  • Manufacturer: Milwaukee Elec Tool
  • Model Number: 4270-20

Power and precision in a lightweight, portable drill press with the biggest capacity in its class. At just 26.5 pounds, with a comfortable carrying handle that’s well positioned for balance, this compact drill press is ideal for remote drilling in metal. It handles your toughest drilling applications with a powerful 1.1-maximum horsepower, 9.0-amp motor: up to 1-½-in. diameter holes through 2-in. thick steel with annular cutters, or ½-in. diameter holes 4-¼-in. deep with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of dead-lift force on 1-in. thick steel.

  • Manufacturer: Atlas Copco
  • Model Number: XAS-97

Powered by John Deere diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise.

  • Manufacturer: Zontec
  • Model Number: PA 2500

Designed to eliminate difficult odors.

  • Manufacturer: General Equipment
  • Model Number: M330H

The Comfort-Flex® composite operator handles flex under load to help absorb vibration and schock. Increased safety in the event of contact with an underground utility line. Heat-treated spur gears are precision machine-cut, deliver unequated torque and horsepower. All-metal centrifugal clutch, oil-cooled to extend life, slips on overload or sudden contact with buried obstructions. Magura twist grip throttle control.

  • Manufacturer: General Equipment
  • Model Number: M240

The first one-man hole digger to feature an all-position 4 stroke gasoline engine. Operate on the side of a hill, or store on its side without fear of damage or oil leaking from the crankcase. No mixing oil with gasoline or the need for two gasoline cans. The Comfort-Zone® operator handle helps maximize leverage and control, which reduces fatigue while increasing productivity and job site safety.

  • Manufacturer: Hilti
  • Model Number: TE 56

Rotation speed gear 1 under no load: 350 rpm
Full hammering frequency: 3300 impacts/minute
Single impact energy: 5.4 ft-lbs

  • Manufacturer: Hilti
  • Model Number: TE 76P-ATC

Rotation speed gear 1 under no load: 360 rpm
Full hammering frequency: 2760 impacts/minute
Single impact energy: 8.5 ft-lbs

  • Manufacturer: Graco
  • Model Number: TrueCoat® Pro II

The TrueCoat® Pro II cordless airless sprayer includes a ProControl™ Pressure Control System that allows you to adjust the pressure to spray a wider variety of applications. Also included in the next generation TrueCoat Pro II sprayer is a full motion of spraying with the new Tilt-N-Spray pendulum suction tube design, a new, lighter weight G20 lithium-ion battery, and the TrueCoat Pro II is fully repairable to extend the life of your sprayer! You’ll get maximum performance, reliability and finish quality that you’d expect from a Graco sprayer.

  • Manufacturer: Graco
  • Model Number: Ultra® 395

The Ultra® 395 PC's reliability and performance has made it Graco's most popular small electric sprayer. Proven technology and design make it perfect for professionals who daily spray a wide range of coatings.

  • Manufacturer: Sakai
  • Model Number: PC800

Features & Benefits:
Dual belt drive
Removable water tank with heavy duty hose and valve
Heavy duty hardened steel plate
Superior shock absorbing isolators

  • Manufacturer: Sakai
  • Model Number: PC600

Features & Benefits:
Removable water tank with heavy duty hose and valve
Foldable handle
Superior shock absorbing isolators
Heavy duty hardened steel plate
Extremely light weight

  • Manufacturer: Powernail
  • Model Number: 100

The POWERJACK® Model 100 flooring jacks are quality tools designed for the professional flooring installer.

PowerJacks are designed to pull or push tongue & groove flooring strips into place and hold them tightly for hands-free nailing. Powerjacks will work on almost any thickness flooring without damaging the flooring surface. They can be used next to the wall, at stud locations or anywhere else on the floor.

  • Manufacturer: Powernail
  • Model Number: 200

The Model 200 is recommended for use on 5/16", 3/8", 1/2" and 9/16" Engineered, Tongue and Groove flooring.

Standard configuration is Short Handle with Short Channel (S/S).

Nailer package includes a White 3mi Mallet, 4 adapter pads, 4 shims, 2 Allen wrenches, lube oil and a manual. Requires a 70 to 110 psi air compressor.

  • Manufacturer: Powernail
  • Model Number: 50P

The Model 50P is a pneumatic Powernailer® designed for 18 gage cleats.
The 50P is recommended for use on 3/8", 1/2", 5/8" and 3/4" Tongue and Groove flooring. The Model 50P with 18 gage Powercleats is your best choice for installing some of the harder, 3/4" exotics such as bamboo and other solid or engineered wood flooring.

The model 50P uses a thinner 18 gage cleat that is less likely to split the tongue on thinner woods. It is also recommended for flooring that is a very hard species like hickory. Many of the hard exotics available today require a thinner cleat to penetrate without splitting the tongue.